Mix the Bondo® All Purpose Fiberglass Resin in a paper cup with the Bondo® Fiberglass Resin Hardener. For small applications use 10 drops of hardener per ounce of resin. Working time will be 10 to 12 minutes. For larger applications, use half of the fiberglass resin hardener supplied, to half of the resin container.

What kind of hardener do you use for fiberglass resin?

Bondo fiberglass resin liquid hardener is designed specifically for use with Bondo fiberglass resin and Bondo metal reinforced filler. This hardener is easily mixed with resin or filler; a chemical reaction creates an extremely strong, waterproof repair material.

What is the mix ratio for fiberglass resin and hardener?

The table below gives the correct ratios of catalyst to resin and gelcoat by weight. 1% is considered a slow mix, 2% is ideal, 3% is a fast mix. Additions outside these bands in not advisable for proper curing, in fact adding more than 4% may result in a failure to cure.

How do you mix Fibreglass resin and hardener?

A 2 oz. tube of liquid hardener (MEK Peroxide) is sufficient to harden the entire contents of a gallon container. Add 14 drops of liquid hardener per 1 oz.of Fiberglass Resin (or for ¼ can of Fiberglass Resin, use ¼ tube of liquid hardener).

Does fiberglass resin dry without hardener?

You let it sit, and sit, and sit, but it never completely hardens. Chances are you did not add enough catalyst, the chemical that hardens the resin. … It’s a chemical process and depends on how close you were to the proper amount of catalyst.

Will red cream hardener work with fiberglass resin?

Repairs fiberglass, metal and wood. … 913C, or 928C Bondo® Red Cream Hardener is designed to be used with Bondo® Body Fillers, Bondo-Glass® Bondo-Hair® and Fiberglass Resin Jelly.

What happens if you put too much hardener in fiberglass resin?

Adding too much of either resin or hardener will alter the chemical reaction and the mixture will not cure properly.

What is fiberglass hardener made out of?

The majority of all fiberglass parts are constructed using polyester resins, it’s the most widely used type of resin in the composites industry. Polyester resins require a catalyst to cure or harden, typically methyl ethyl ketone peroxide (MEKP).

What is fiberglass hardener made of?

Fiberglass resin is used to repair the bodies of cars and boats. Completed, dry fiberglass resin is made of fiberglass cloth bonded to the car or boat with resin and a catalyst, to make the resin harden.

How much hardener do I mix with resin?

Mix the resin VOLUME – To achieve the correct 2:1 mix ratio by volume, simply measure out 2-parts resin to 1 part hardener before mixing the components.

Article first time published on

How do you mix fiberglass resin jelly?

Mixing: Knead cream hardener tube thoroughly. For a golf ball-size amount of resin jelly, squeeze out 1 1/4 inch strip of hardener, or mix a 3 inch diameter circle 1/2 inch thick of resin jelly to a 3 inch strip of cream hardener. Mix thoroughly to a uniform color on clean, non-porous surface.

Is fiberglass resin the same as epoxy?

The key difference between epoxy and fiberglass resin is that epoxy resins are made mainly from the reaction between epichlorohydrin and bisphenol A, whereas fiberglass resin is made from the combination of alcohols and organic acids.

How much catalyst do you add to resin?

Generally speaking, for Polyester Resins, the mixing ratio is 2% i.e. 20ml for every 1kg of Resin in working conditions at room temperature. For the Water Clear Casting Polyester Resin, this drops to 1.5% or 15ml for every 1kg.

How do you calculate resin ratio?

For a ratio of: 10:1Total weight of epoxyWeight of resinWeight of hardner10696.49.610898.29.811010010

Can fiberglass resin be used alone?

Suitable for a tremendous range of projects, Bondo® Fiberglass Resin can stand alone or be used with backing strips, tape, cloth or fiberglass mat for jobs where you need reliable strength.

Can I use resin without hardener?

Polyester resin that is formulated for use with a catalyst will eventually cure or harden without adding the catalyst. The catalyst speeds up the reaction so it cures quicker.

What happens if you don't use enough hardener resin?

Too much or too little hardener will affect the cure time and thoroughness of the cure. A. Remove the uncured epoxy. Do not apply additional material over non-curing epoxy.

How do you know when resin is cured?

  1. Yellowing of prints: If you notice that your prints are starting to yellow or get discoloured, then you’ve exceeded the necessary curing time.
  2. Brittleness: A brittle resin print is a sign that you may have left the print in the curing station for too long.

What happens if you mix epoxy wrong?

Not mixing the Epoxy correctly Some epoxy mixing instructions specify that you mix it by weight and others by volume. You need to take careful note of these instructions. If you make a mistake in the mixing ratio, you will find that your epoxy will harden too quickly or too slowly, and worst of all not harden at all.

How do you fix sticky resin?

Sand the entiry sticky surface off with 80-grit sandpaper and pour another resin coat layer. For the smaller sticky spots, you can try resin spray, which dries very quickly leaving a clear and gloss finish. It’s very easy to use and great for small projects. Seal with acrylic based spray or gloss sealer spray.

What is Bondo hardener made of?

This hardener is mixed with polyester fiberglass resins to create extremely strong, durable and waterproof repairs. Once mixed, the fiberglass resin will cure in approximately 2 hours.

Are all cream hardener the same?

All the different color hardeners are chemically the same, just different color dyes. One color is not going to work any better or worse than any of the other colors. And those hardeners don’t freeze (at least here in Freeze Your Nads, Michigan) where 10 below zero is not out of the ordinary.

What is cream hardener used for?

3M™ Cream Hardener mixes with 2-part fillers, putties and glazes to create high-quality, long-lasting repairs. When filler and hardener are mixed, a chemical reaction occurs to create a mixture that will deliver a strong, lasting repair.

What is resin hardener?

Epoxy resin systems consist of two parts, an “A” and a “B” side. The B side, also known as the “hardener”, is the epoxy curing agent; the curing agent is responsible for reacting with the epoxy groups contained in the epoxy resin A side. Reaction of curing agents with epoxy resins results in hard, thermoset materials.

What is difference between polyester resin and epoxy resin?

Epoxy is more resistant to wearing, cracking and peeling, and corrosion or damage from chemical or environmental degradation. Polyester is more fragile and useful for temporary fixes, or low-stress use. Epoxy is generally more expensive than resin, due to its strength and formulation requirements.

What ingredients are in resin?

Composition. Most plant resins are composed of terpenes. Specific components are alpha-pinene, beta-pinene, delta-3 carene, and sabinene, the monocyclic terpenes limonene and terpinolene, and smaller amounts of the tricyclic sesquiterpenes, longifolene, caryophyllene, and delta-cadinene.

What is epoxy hardener made of?

Epoxy resins are thermosetting polymers with unique mechanical and resistance properties. They are the result of a chemical reaction called ‘curing’, which involves epoxides and other chemicals more commonly known as ‘hardeners’ or curing agents.

Is fiberglass resin toxic?

Many fibreglass products give off fumes which can be harmful if inhaled in sufficiently large quantities. … When machining finished items in cast resin or laminated fibreglass, the tiny particles of fibreglass or resin can be dangerous to the eyes and lungs.

What is Fibreglass hardener?

Products / Protite Fibreglass / Fibreglass Catalyst Hardener. Protite Fibreglass Resin Catalyst Hardener starts the curing / hardening process and is required to set off Protite Fibreglass Resin and Protite Clear Casting and Embedding Resin. It comes in an easy to use dropper bottle for accurate measurement.

How do you mix large amounts of resin?

  1. Place the measuring stick in the bottom of the container. …
  2. Pour the resin into the bucket until it reaches the resin fill line. …
  3. Pour the hardener into the bucket until it reaches the hardener fill line.
  4. Mix thoroughly with the measuring/mixing stick (smaller batches).

How do you mix 3 resin?

This resin uses a 3:1 hardener. Mixing 3 parts epoxy to 1 part hardener will give you the appropriate final mixture. This is considered to be a medium hardener, Our 2:1 epoxy will cure slower and our 4:1 hardener epoxies will cure much faster. However this 3:1 hardener will provide you with the best of both worlds.